The Triggered Company·Formerly Partisan Triggers — same trigger, same team, new name$279.99No code needed · Ends July 7th 2026 · Authorized dealer MAP HOLIDAY
BUILD IT IN A COMBO & SAVE $50
Get this with a matched buffer and M16-cut BCG — everything spec'd to run together, shipped in one order.
The Triggered Company Disruptor is the top-rated drop-in FRT for AR-15 — and right now it's $299.99 during their MAP holiday. That's $50 off the standard price, no code required, from an authorized dealer with product in stock.
This is the same trigger. Same USA manufacturing. Same patented cassette architecture. The Triggered Company is the new name for Partisan Triggers, effective May 1, 2026. Nothing about the trigger changed.
✓Authorized TTC Dealer
✓$299.99 — Best Price Online
✓In Stock — Ships 1–2 Days
✓100% USA Made
✓ Partisan Triggers renamed The Triggered Company
✓Federally Legal — Compliance Verified
What Is the Triggered Company Disruptor?
The Disruptor (US Patent 9146067) is a forced reset trigger built on a drop-in cassette architecture. The entire fire control group — hammer, trigger, disconnector, springs, and reset mechanism — comes pre-assembled inside the cassette housing. Drop it into your mil-spec AR-15 lower, insert the pins, and it runs. No gunsmithing. No fitting. No permanent modification.
The key mechanism: as the bolt carrier group cycles rearward after each shot, it physically forces the trigger forward to its reset point. On a standard trigger, that reset happens through spring tension alone. On the Disruptor, it's mechanically imposed by the BCG. The result is a dramatically shorter felt reset and cyclic rates approaching 1,150 RPM in Enhanced Semi-Auto mode — while still firing exactly one round per trigger pull.
Every shot requires a deliberate trigger pull by the shooter. Release pressure and the firing cycle stops immediately. This is how the Disruptor remains federally legal as a semi-automatic trigger under the NFA.
About the Rebrand — Partisan Triggers → The Triggered Company
As of May 1, 2026, Partisan Triggers has officially rebranded as The Triggered Company. The Disruptor is now sold under SKU TTC-DSPTR-ART-GRN/BLK. The trigger itself is mechanically unchanged — same patented cassette design, same USA manufacturing, same warranty. If you've been waiting to buy a Partisan Disruptor, you're buying the same trigger under the new name.
Three Selector Positions — One Trigger
SAFE
Standard mechanical safety. Disconnects trigger from firing sequence.
SEMI
Standard semi-automatic function. One round per trigger pull, manual reset by shooter.
FRT
Enhanced Semi-Auto (forced reset) mode. BCG mechanically resets trigger after each shot. One round per trigger pull, reset speed limited only by BCG cycle.
Specifications
Brand
The Triggered Company (formerly Partisan Triggers)
Reassemble upper and lower. When closing, pull the charging handle back slightly to clear the trip bar. Close and function check.
M16-cut lowers: The extra clearance in M16/auto sear pocket lowers can allow a critical internal screw to back out. Stake it before seating the cassette.
Buffer requirement: A standard carbine buffer cycles too fast for reliable FRT reset timing. H2 (4.6 oz) is the minimum. H3 is the recommended sweet spot for carbine-length builds. This is the #1 cause of FRT cycling issues — verify buffer weight before your first range
Compatibility
Compatible: Standard mil-spec AR-15 lowers (direct impingement and piston systems). Runs reliably across standard magazine types including Magpul Gen 2/3 PMAG, Lancer, Daniel Defense, Hexmag, Amend 2, and GI aluminum.
Not compatible: SIG MCX (light primer strikes reported). PSA AR-V 9mm PCC (ejection issues reported). Verify platform compatibility before ordering.
Note on selector: TTC safety selectors must be used with the Disruptor — your existing safety selector is not compatible. The included selector is the correct one.
Legal Status
The Triggered Company Disruptor is federally legal following the Supreme Court's ruling in Garland v. Cargill (2024) and the May 2025 DOJ settlement ending all federal FRT enforcement. The Disruptor fires one round per trigger function and is not a machine gun under the NFA. No tax stamp required.
State restrictions apply. We verify compliance on every order. We do not ship to CA, CO, CT, DE, HI, IL, MA, MD, MN, NJ, NY, OR, RI, or WA. Orders placed from restricted states will be cancelled and refunded.
On the Rare Breed lawsuit: The Disruptor is built on US Patent 9146067, which predates Rare Breed's patents. Engineering testimony during the February 2026 injunction hearing confirmed the two triggers operate through mechanically distinct mechanisms. The court denied Rare Breed's emergency injunction — every major procedural decision in the case has gone The Triggered Company's way.
Need the complete setup?
The Disruptor requires an H2+ buffer to run reliably. Our bundle includes the Disruptor FRT + M16-profile BCG + H2.5 buffer — matched, tested, and ready to run. Plus a free AR Takedown Tool.
Is this the same trigger as the Partisan Disruptor?
Yes. The Triggered Company is the new name for Partisan Triggers as of May 1, 2026. The Disruptor is mechanically unchanged — same patent, same materials, same manufacturing. The SKU updated to TTC-DSPTR-ART-GRN/BLK.
Do I need a special buffer?
Yes. For carbine-length builds and barrels 16" or shorter, you need a minimum H2 buffer (4.6 oz). H3 is recommended. A standard carbine buffer will cause cycling issues. Our bundle includes an H2.5 — the sweet spot for most builds.
Is the Disruptor legal in my state?
Federally legal as of May 2025. State restrictions apply — we cannot ship to CA, CO, CT, DE, HI, IL, MA, MD, MN, NJ, NY, OR, RI, or WA. We verify compliance on every order using a third-party service.
What's the difference between the black and OD green?
Cosmetic only. Black (Model 1) and OD Green (Model 2) are mechanically identical. Choose based on your build's color scheme.
Does it work in my lower?
Compatible with standard mil-spec AR-15 lowers on DI and piston systems. Not compatible with SIG MCX or PSA AR-V 9mm PCC. M16-cut lowers require staking the internal screw before installation.
What comes in the box?
The Disruptor cassette assembly, TTC 3-position safety selector, anti-rotation pins, thread locker, and installation documentation. Every order from ARTakedownTool.com also includes a free AR Takedown Tool.
The Triggered Company Disruptor is designed to fire one round per trigger function and is federally legal under the NFA. Compliance with all applicable federal, state, and local laws is the buyer's sole responsibility. ARTakedownTool.com verifies state compliance on every order and does not ship to restricted states. Installation by a qualified gunsmith is recommended. Not compatible with all platforms — verify compatibility before ordering.
Product reviews
Specs of The AR-TT
The AR-Takedown Tool (AR-TT)
- weight is only 58 grams, under 3oz
-Length: 6 5/16"
-Diameter 1/2"
-This is the ONLY USA made gun smithing tool, gun cleaning tool, building tool, disable tool on the market.
You Might Also Like
Customer Reviews
Overall rating: 4.7 / 5 from 33 reviews.
I ordered this thinking I would beat the next stupid ban. So the trigger arrived very fast, just a few days, and I didn't pay for the extra shipping charge for getting it faster. Wasn't needed in my case. This was so easy to install a blind person could do it. Then I took it to the range and I expected it not to work like it was described. OMG did my face light up! Burned up two magazines in less than 10 seconds I think. And is still safe, and it retains the semi auto, or one shot per pull capability. I'm buying more for my other AR's now.
The trigger swap is fairly straightforward and I did not encounter any huge issues. The new trigger makes range day tons of fun and I couldn't stop giggling like a schoolgirl. The only interesting point of note, for me anyhow, is that I bought new buffers, as the ones on my rifle were stock. The heavier buffers actually caused a ton of issues, so I put the original buffers back in and they've run flawlessly since. 10/10 Would recommend.
Won’t feed the first round I’m not a beginner AR shooter or builder try different bulk carriers. Try different buffer whites and springs only to get your customer service to tell me nothing when they answer my email. You have no phone number or tech-support, so I’ll let someone hire up the may handle this.
