Wrangeler AK-47 Drop-In Trigger Installation Video
Wrangler AK-47 Drop-In Trigger Installation Video
This video shows how to install the Wrangler AK-47 drop-in trigger, officially the Wrangeler from The Triggered Company. The whole install takes under a minute on camera: the factory trigger group comes out, and the Wrangler cassette drops in as one unit.
What the Video Covers
0:00 Introduction
0:03 Installation
0:36 Wrap-up
Before You Install
Unload the rifle, remove the magazine and verify the chamber is empty. Then field strip it: dust cover, recoil spring and bolt carrier out.
Confirm your rifle is a stamped AKM-pattern AK-47 in 7.62x39, such as a Zastava ZPAP M70 or a Century WASR-10. The Wrangler works only with the selector that comes with it, so plan to swap your factory selector. Check our AK-47 FRT compatibility guide if you're not sure.
After You Install
Reassemble the rifle and function check all three selector positions with the rifle unloaded: Safe should block the trigger, Semi should reset like a standard AK, and Forced Reset should push the trigger forward when you cycle the action.
Who It's For
- New Wrangler owners installing their trigger
- AK-47 owners deciding whether the install is DIY
- Gunsmiths installing Wrangler triggers for customers
- Anyone comparing drop-in AK trigger upgrades
If you just got your Wrangler, watch this before you start.
One Cassette. Three Positions. No Fitting.
The Wrangler is The Triggered Company's 3-position drop-in FRT for the AK-47. It's $399, and orders are open now.
Wrangler AK FRT Walkthrough Video
Ready for Your Wrangler?
Get the drop-in 3-position trigger from this video.