This is the only complete FRT combo on the market where every single component is 100% American made. The Triggered Company Disruptor FRT, the Trigger Supply M16-profile BCG, and the Odin Works HFRT buffer system — three purpose-matched, USA-built components that install together as a complete forced reset trigger drop-in package for any mil-spec AR-15. Buy it. Install it. Run it. No guesswork on compatibility. No sourcing three components separately. One FRT kit with everything your AR-15 needs to run a forced reset trigger reliably from the first round.
Every Component Included
The Complete FRT Drop-In Kit
The Triggered Company Disruptor FRT is the top-rated forced reset trigger on the market. A complete drop-in cassette that installs in any mil-spec AR-15 lower using standard trigger and hammer pins — no gunsmithing, no machining, no modification to your receiver. The Disruptor uses your BCG's rearward travel to mechanically reset the trigger after every shot, allowing dramatically faster follow-up fire while firing one round per trigger pull. US Patent 9146067. 17-4 stainless and 4140 chromoly wear surfaces. 100% USA made.
The Trigger Supply M16-profile bolt carrier group is the FRT bolt carrier group your Disruptor demands. Every forced reset trigger requires an M16-profile BCG — the extended underside geometry is what the FRT's reset lobe contacts during the rearward stroke to drive the mechanical reset. A standard AR-15 profile BCG will not work. The Trigger Supply BCG is machined and assembled 100% in the USA to mil-spec dimensions with the full-profile carrier your FRT combo needs to function reliably from the first round.
The Odin Works HFRT buffer system is engineered specifically for forced reset trigger builds — not a general-purpose buffer adapted for FRT use, but a buffer designed from the ground up around the cycling requirements of the Disruptor FRT and every other AR-15 FRT drop-in. Your FRT kit is only as reliable as its buffer. The HFRT gives the Disruptor the precise dwell time its BCG-driven reset mechanism needs to complete its cycle consistently. Made in Southern Idaho. 100% USA manufactured.
Why This FRT Combo
The Only All-American FRT Package
Building a forced reset trigger AR-15 requires three components to work together — the FRT itself, the FRT bolt carrier group, and the buffer system. Get any one of these wrong and your forced reset trigger won't run reliably. Most FRT combos on the market mix foreign-made BCGs or generic buffers with American-made triggers. This is the only complete FRT kit where all three components are built in the United States.
- ◆Matched and tested components — the Disruptor FRT, Trigger Supply M16 BCG, and Odin Works HFRT are selected specifically because they work together. No compatibility guesswork. No sourcing three separate products. This FRT package installs as a system.
- ◆The only all-USA FRT combo — Triggered Company (USA), Trigger Supply (USA), Odin Works Southern Idaho (USA). Every component in this FRT drop-in kit is American designed, American machined, American assembled.
- ◆Ready to run from installation — the HFRT buffer is pre-matched to the Disruptor FRT's cycling requirements. Install the BCG, drop in the Disruptor cassette, seat the HFRT buffer, and your forced reset trigger build is ready for live fire.
- ◆Authorized dealer — genuine products — every component in this FRT kit is sourced directly from the manufacturer. You get factory warranty coverage on all three pieces through ARTakedownTool.com as an authorized dealer.
- ◆Anti-walk pins included — the Disruptor FRT ships with anti-walk pins to prevent trigger and hammer pin migration under the high-cycle-rate stress of forced reset trigger operation. Included in this bundle at no additional cost.
- ◆Compliance verified on every order — we verify your shipping state before every FRT combo order leaves our warehouse. We do not ship to restricted states.
A forced reset trigger is mechanically different from any standard trigger. The Disruptor FRT uses the M16-profile BCG's rearward stroke to contact the reset lobe and push the trigger forward. Too light a buffer and the BCG returns faster than the reset can complete — you get short-strokes and failures. This FRT combo gives you the trigger, the FRT bolt carrier group, and the HFRT buffer in one package. Three components working as one system. Drop it in and it runs.
Complete Specs — All 3 Components
Full FRT Kit Breakdown
| Component / Spec | Detail |
|---|---|
| DISRUPTOR FRT — THE TRIGGERED COMPANY | |
| Trigger Type | Forced Reset · Drop-In Cassette |
| Platform | AR-15 Mil-Spec Lower · Standard Trigger Pins |
| Selector Positions | 3-Position: Safe / Semi / FRT Mode |
| Materials | 17-4 Stainless + 4140 Chromoly Wear Surfaces |
| Pull Weight (Semi) | 3.75–4.1 lbs · CMP Service Rifle Compliant |
| Cyclic Rate (FRT Mode) | ~1,150 RPM |
| Durability | 6,000+ Rounds · USMC M27 IAR Criteria |
| Patent | US Patent 9146067 |
| Included | FRT Cassette · Anti-Walk Pins · 3-Position Selector |
| Installation | Drop-In · No Gunsmithing · No Receiver Modification |
| Made In | 100% USA — The Triggered Company |
| M16-PROFILE BCG — TRIGGER SUPPLY | |
| BCG Profile | M16-Profile — Required for All FRT Platforms |
| Caliber | 5.56 NATO / .223 Wylde / .300 Blackout |
| Dimensions | Full M16-Profile Carrier — Mil-Spec |
| FRT Function | Extended underside contacts FRT reset lobe on rearward stroke |
| Made In | 100% USA — Trigger Supply |
| HFRT BUFFER SYSTEM — ODIN WORKS | |
| Buffer Type | FRT-Specific — HFRT Purpose-Built Design |
| Platform | AR-15 Mil-Spec Carbine Buffer Tube |
| Installation | Drop-In · Standard Mil-Spec Tube |
| FRT Optimized | Yes — Weight profile tuned for Disruptor FRT cycling |
| Warranty | Odin Works Lifetime Warranty |
| Made In | 100% USA — Odin Works, Southern Idaho |
| BUNDLE | |
| Bundle Price | $499.99 |
| All Components USA Made | Yes — 100% |
| Platform | AR-15 Mil-Spec Lower Receiver |
| Federally Legal | Yes — Post May 2025 DOJ Settlement |
| Compliance Check | Verified on Every Order · No Restricted State Shipments |
Why ARTakedownTool.com
Genuine products from all three manufacturers. Factory warranty on every component. No gray market, no third-party resellers.
The only complete FRT combo where every single component — trigger, BCG, buffer — is 100% American manufactured.
Every FRT order is verified for your state before it ships. We do not ship to restricted states. Zero risk to you.
In stock and ships from the USA. Typically 1–2 business days on in-stock orders. Tracking provided on every order.
Legal Status 2026
Is This FRT Kit Legal?
Yes — federally legal following the May 2025 DOJ settlement, which formally ended the ATF's prior classification of forced reset triggers as machine guns. This FRT package fires one round per trigger pull. No NFA registration. No tax stamp. No paperwork at the federal level.
State restrictions apply. This forced reset trigger combo is restricted in California, Connecticut, Delaware, Hawaii, Illinois, Maryland, Massachusetts, New Jersey, New York, Oregon, Rhode Island, Washington, and DC. We verify compliance on every order and will not ship to restricted states.
Related Products & Guides
Build It Your Way
The Triggered Company Disruptor FRT is covered by US Patent 9146067. ODIN Works® is a registered trademark of Odin Works, Southern Idaho, USA. Trigger Supply BCG is 100% USA manufactured. All forced reset triggers are federally legal following the May 2025 DOJ settlement. State restrictions apply — see our complete state legal guide before ordering. ARTakedownTool.com verifies compliance on every order and does not ship to restricted states.
The AR-Takedown Tool (AR-TT)
- weight is only 58 grams, under 3oz
-Length: 6 5/16"
-Diameter 1/2"
-This is the ONLY USA made gun smithing tool, gun cleaning tool, building tool, disable tool on the market.