Matched Combo · The Triggered Company
The LAT paired with a high-polish TiN M16-cut bolt carrier group. One order, one matched setup, no guesswork about whether your carrier will run a forced reset trigger.
The most common reason a forced reset trigger runs poorly has nothing to do with the trigger. It is the carrier. A semi-auto profile BCG will not work with an FRT, and a worn or out-of-spec carrier turns a precise trigger into a troubleshooting project. This combo removes that variable entirely.
The LAT is the match-grade trigger in The Triggered Company's lineup, built on the same drop-in cassette approach as the Disruptor with a refined feel and a variable-rate third position. The carrier is a full M16-cut profile finished in titanium nitride and polished to a mirror shine, so it looks the part through a cutout receiver and runs slicker than a phosphate carrier.
Combo Price
$499.99 — The LAT + TiN M16 BCG
The LAT is $375.00 and the carrier is $189.99 bought separately. Together that is $564.99, so the combo saves you $65.00. Both pieces matched, shipped together, compliance verified on every order.
- Harder surface than bare steel. Titanium nitride is a hard ceramic coating. On the wear surfaces of a carrier that cycles hard and often, that matters.
- Lower friction. A slicker carrier means less drag through the receiver, which is exactly what you want when the carrier's return stroke is doing the work of resetting your trigger.
- Polished before it is coated. The carrier and bolt are pre-polished, then finished, so the mirror surface is in the metal underneath rather than sitting on top of a rough part.
- Carbon wipes off. The polished surface does not hold fouling the way phosphate does. Most cleanups are a rag and a few minutes.
- M16 cut, full profile. Required for forced reset triggers. No trimming, no "will this work" guesswork.
- It looks the part. If you run a side-cut or clear receiver, a mirror-polished gold carrier is the reason people ask about your build.
- The LAT — 3-position drop-in cassette trigger from The Triggered Company
- TiN M16-Cut BCG — high-polish titanium nitride, full auto profile, 9310 bolt and 8620 carrier, USA made
- The AR Takedown Tool — the only tool needed for the install, included free
| Component | Detail |
|---|---|
| Trigger | The LAT, The Triggered Company (formerly Partisan Triggers) |
| Trigger design | Self-contained drop-in cassette, 3-position |
| Carrier profile | M16 cut, full auto profile |
| Carrier finish | Titanium nitride (TiN), high polish |
| Bolt | Enhanced 9310 steel, shot peened and MPI tested |
| Carrier | 8620 steel, full M16 cut |
| Extractor | Tool steel extractor, mil-spec spring, black insert, Viton O-ring |
| Firing pin | Shrouded |
| Gas key | Mil-spec 4130 steel, Grade 8 hardware, properly staked |
| Polish process | Pre-polished before processing, then post-polished |
| Platform | Mil-spec AR-15 — .223 Rem / 5.56 NATO / 300 Blackout |
| Origin | 100% USA made |
| Install time | Roughly 10 to 15 minutes |
Works with: mil-spec AR-15 lower receivers with standard trigger and hammer pin spacing, properly gassed direct impingement uppers, and a buffer and spring matched to your gas system.
Does not fit: AR-10, .308 and LR-308 platforms, and non-mil-spec lowers with modified pin dimensions. Piston systems may need additional tuning.
If your rifle runs reliably with a standard trigger and mil-spec ammunition, it will very likely run this combo without modification. If you are unsure which buffer to pair with it, start with our AR-15 buffer weight guide.
Know your state law. Forced reset triggers are federally legal following the May 2025 DOJ settlement, but several states restrict them. Read the state-by-state FRT legality guide before ordering. We verify compliance on every order and do not ship to restricted jurisdictions.
- Best FRT triggers for the AR-15 — how The LAT and the Disruptor compare to everything else we carry
- The Triggered Company collection — the full trigger lineup
- FRT vs Super Safety — which system fits your build
The AR-Takedown Tool (AR-TT)
- weight is only 58 grams, under 3oz
-Length: 6 5/16"
-Diameter 1/2"
-This is the ONLY USA made gun smithing tool, gun cleaning tool, building tool, disable tool on the market.