The Hoffman Tactical Super Safety with flat trigger is a 3-position active reset selector for AR-15 — the most popular super safety for AR-15 on the market. It adds forced reset capability to your existing trigger group without replacing a single internal component. Legal in all 50 states, no BCG requirement, no buffer upgrade needed. In stock and ships fast from an authorized dealer.
What Is the Hoffman Tactical Super Safety?
The Hoffman Tactical Super Safety is a 3-position active reset selector system for AR-15 mil-spec lowers. It replaces your standard 2-position safety selector with a 3-position system — Safe, Semi-Auto, and Active Reset — that uses a cam-and-lever mechanism to push the trigger forward and force a reset as the bolt carrier group cycles.
The result: faster follow-up fire than any standard mil-spec trigger allows, without replacing your hammer, trigger, disconnector, or springs. The Super Safety flat trigger variant pairs this selector system with a flat trigger face — preferred by many shooters for more consistent finger placement and a cleaner break feel.
Unlike a full drop-in FRT cassette, the Hoffman Super Safety works with your existing trigger group. It's the fastest way to add active reset capability to an AR-15 you already trust — especially if you've already invested in a quality aftermarket trigger.
Hoffman Tactical Super Safety — Full Specs
| Specification | Detail |
|---|---|
| System Type | 3-position active reset selector — enhanced safety |
| Trigger Face | Flat trigger — straight face profile |
| Selector Positions | Safe / Semi-Auto / Active Reset (3-position) |
| Platform | AR-15 mil-spec lower — standard safety selector hole |
| Installation | Selector swap + pre-cut trigger installation |
| Trigger Group | Works with existing mil-spec or aftermarket trigger group |
| BCG Requirement | No specific BCG required — works with standard AR-15 BCG |
| Buffer Requirement | No specific buffer required — standard carbine buffer works |
| Manufacturing | 100% USA-made |
| Legal Status | Legal in all 50 states — no restrictions |
| Lower Modification | Minimal — trigger pre-cut required, detent modification |
How the Super Safety Flat Trigger Works
The Hoffman Tactical Super Safety replaces your standard safety selector with a 3-position mechanism. Here's how the active reset position works:
- Safe position — standard safe, trigger blocked
- Semi-auto position — standard semi-auto, your existing trigger fires and resets manually as normal
- Active reset position — as the BCG cycles, the Super Safety cam contacts your trigger and pushes it forward, mechanically forcing reset before the bolt returns to battery
The flat trigger face in this configuration gives you a consistent, straight contact point across the full trigger pull — reducing the tendency to push shots that curved trigger faces can create when finger placement varies between shots.
Super Safety vs Full FRT Trigger — Which Is Right for You?
Buy the Partisan Disruptor FRT if: You want the highest cyclic rate, maximum reset consistency, and a fully self-contained system. The Disruptor replaces the entire trigger group with a matched cassette and achieves ~1,150 RPM in FRT mode.
Run both: The Super Safety is fully compatible with the Partisan Disruptor. Many shooters run the Disruptor cassette with the Super Safety selector for maximum versatility.
→ Full FRT vs Super Safety comparison guide
Installation Overview
The Hoffman Super Safety flat trigger installation requires:
- Pre-cut trigger — your existing trigger needs a selector shelf cut to allow the Super Safety cam to interface correctly. Many Super Safety kits include a pre-cut trigger — the easiest path
- Safety selector removal — remove your existing 2-position selector completely
- Cam, lever, and detent installation — install the Super Safety components in the selector pocket
- Detent modification — the safety detent requires modification to accommodate the 3-position system
- Function check — verify all three positions before loading
Total install time: 20-30 minutes for a first-time install. No BCG swap, no buffer swap, no lower modification beyond the selector pocket and detent.
Why Buy From ARTakedownTool.com
Also Available
Related Guides
The AR-Takedown Tool (AR-TT)
- weight is only 58 grams, under 3oz
-Length: 6 5/16"
-Diameter 1/2"
-This is the ONLY USA made gun smithing tool, gun cleaning tool, building tool, disable tool on the market.